Two-brothers-racing Kawasaki KFX50 Manuel d'utilisateur télécharger pdf

2007 Kawasaki

KFX50

Complete Exhaust System with M-6 Canister

Part # 005-1690104M

Parts List

Installation Instructions

Qty. Description Part Number

1 M-6 Mufﬂer Canister 005-169-204

1 SS Header Assembly 005-16901H

1 HARDWARE KIT 005-169-3

1 8x30mm Flange Bolt 005-FB830

1 8mm Flange Nut 005-FN8

1 Permatex High Temp Sealant 031-P22072

2 Two Brothers Racing Decals 015-10208-A

Use a small amount of supplied high temp sealant

inside of mufﬂer at pipe joint. Slide mufﬂer into place

and tighten to frame with 8x30mm Flange Bolt.

Re-install the right side engine cover.

Before you run the bike, clean off all ﬁngerprints and

dirt, as any oily residue will etch the metal and become

somewhat permanent when the system gets hot. Run

the bike and enjoy. It is normal for some white smoke

to appear the ﬁrst time you start the bike. This is

packing/manufacturing oil from inside the pipe burning

off. Check for gaps or leaks. If you ﬁnd a leak, a little

high temperature silicon sealant should ﬁx it. After 1 to

2 hours of riding recheck all fasteners for tightness.

Care & Cleaning

Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is

completely cool before maintenance.

Stainless Header System: Polished stainless steel pipes will turn a light golden hue

after a few heat cycles, this is a normal characteristic of high quality stainless steel.

Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft,

clean cloth.

Titanium Header System: Polished titanium pipes will experience color shift ranging

from deep blue/purple through amber after a few heat cycles. This is a normal

characteristic of high quality titanium. Clean using a mild water based spray cleaner.

Always apply cleaner or polish with a soft, clean cloth.

Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the

bright ﬁnish to factory spec.

Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always

apply cleaner or polish with a soft, clean cloth.

Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply

cleaner or polish with a soft, clean cloth. Always make sure the ﬁberglass packing inside

is in good condition and not burned out, as exhaust heat inside an empty canister will

deteriorate the carbon ﬁber sleeve.

TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include

everything you need to easily do it yourself.

Titanium Mufﬂers: For cleaning use a mild water based spray cleaner. Always apply

cleaner or polish with a soft, clean cloth. Always make sure the ﬁberglass packing inside

is in good condition and not burned out, as exhaust heat inside an empty canister will

deteriorate the carbon ﬁber sleeve.

TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include

everything you need to easily do it yourself.

Repack all road canisters every 3,000 miles. Part #005-10038

Repack all offroad canisters after every 10 hours of use. Part #005-10038MX

NEVER dyno test your bike with carbon ﬁber or titanium canisters installed - the

intense heat and lack of cooling air can quickly burn through the canister material. Two

Brothers Racing does not provide a warranty for burned canisters.

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read

all instructions rst before starting installation. Make sure the vehicle and

exhaust system are completely cool before starting the installation. Also,

make sure the vehicle is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Make sure the ATV is completely cool before starting

the installation. Make sure the ATV is secure with

parking brake on.

Remove right side engine cover (black). Push pin in the

inside of holder and pull outside out.

Remove OEM exhaust pipe.

Do not use the gasket between the header and

cylinder head. Make sure header pipe collar sits down

into recess before tightening header ﬂange. (It may be

easier to see by standing ATV up on rear bumper.

Use the supplied 8mm Flange Nut to secure head pipe

to mid-pipe bracket using OEM bolt.

1 2

2007 Kawasaki 1

Résumé du contenu

Page 1 - 2007 Kawasaki

2007 KawasakiKFX50Complete Exhaust System with M-6 CanisterPart # 005-1690104MParts ListInstallation InstructionsQty. Description Part Number1 M-6

Page 2

005-1690104MQty. Description Part Number1 M-6 Mufﬂer Canister 005-169-2041 SS Header Assembly 005-16901H1 HARDWARE KIT 005-169-31 8x30mm Fl

Commentaires sur ces manuels

Pas de commentaire

Two-brothers-racing Kawasaki KFX50 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Two-brothers-racing Kawasaki KFX50. Two Brothers Racing Kawasaki KFX50 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Two-brothers-racing Kawasaki KFX50