Two-brothers-racing Can-Am Outlander 1000R Manuel d'utilisateur télécharger pdf

1. Make sure the ATV is completely cool before starting

the installation. Make sure the ATV is secure on a level

surface and the parking brake is set.

2. Remove mufer.

3. Remove grommet and sleeve from OEM mufer and

insert into TBR mufer mount.

V.A.L.E.

VARIABLE AXIS LOCKING EXHAUST

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

Installation Instructions

4. Attach slip-on tube to TBR mufer using the provided 4

6x20mm bolts and lock washers with X-ring. Leave loose

for now.

5. Attach mufer mounting bracket (supplied) to rear OEM

mufer mounting hole using the supplied 8x60mm bolt

and nut as shown.

6. Loosely install mufer assembly and attach to mounting

bracket using the OEM bolt and nut for alignment. After

exhaust is aligned tighten one X-ring bolt to secure slip-

tube in place.

7. Remove mufer assembly and tighten the remaining

X-ring bolts and re-install and secure in place using OEM

nut and bolt.

8. Tighten Barrel clamp.

9. Double check your work and make sure all bolts are

tightened and the exhaust is aligned correctly.

10. Before you run the ATV, clean off all ngerprints and

dirt, as any oily residue will etch the metal and become

somewhat permanent when the system gets hot. Run the

ATV and enjoy. It is normal for some white smoke to

appear the rst time you start the ATV. This is packing/

manufacturing oil from inside the pipe burning off.

Check for gaps or leaks. If you nd a leak, a little high

temperature silicon sealant should x it. After 50 to 100

miles, recheck all fasteners for tightness.

2012 Can-am

Outlander 1000R

V.A.L.E.™ Slip-on Exhaust System with M-7 Aluminum Canister

Part # 005-3130406V

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Be sure

to save all stock components for possible use later.

**This product has not been tested with all available accessories and some

items may cause excessive heat. Excessive heat may cause damage to your

vehicle. Two Brothers Racing will not be responsible for damaged parts.

1 2

V.A.L.E 1

Résumé du contenu

Page 1 - V.A.L.E

1. Make sure the ATV is completely cool before starting the installation. Make sure the ATV is secure on a level surface and the parking brake is set

Page 2

Care & CleaningCare & CleaningKeep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is completely cool before

Commentaires sur ces manuels

Pas de commentaire

Two-brothers-racing Can-Am Outlander 1000R Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Two-brothers-racing Can-Am Outlander 1000R. Two Brothers Racing Can-Am Outlander 1000R User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Two-brothers-racing Can-Am Outlander 1000R