V.A.L.E.
VARIABLE AXIS LOCKING EXHAUST
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualied
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions rst before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
2. Remove mufer assembly.
3. Install TBR mufer to slip-tube shown using the supplied
X-Ring and bolts with lock washers, keep loose for now.
Loosely Install barrel clamp at end of slip-tube.
4. Install mufer assembly to motorcycle using the supplied
barrel clamp at header joint and rubber lined mufer clamp
securing mufer to standard mounting position. Use the
supplied black spacer inbetween mounting position and
mufer clamp. keep loose for now.
5. Check alignment of mufer and tighten the 4 6x14mm
socket head cap screws. Then tighten barrel clamp and
lastly tighten mufer mount.
6. Double check your work to ensure everything is tight and
properly installed.
7. Before you run the bike, clean off all ngerprints and dirt, as
any oily residue will etch the metal and become somewhat
permanent when the system gets hot. Run the bike and
enjoy. It is normal for some white smoke to appear the rst
time you start the bike. This is packing/manufacturing oil
from inside the pipe burning off. Check for gaps or leaks.
If you nd a leak, a little high temperature silicon sealant
should x it. After 50 to 100 miles, recheck all fasteners for
tightness.
2009 Suzuki
Gladius
V.A.L.E.™ Slip-On Exhaust System with M-2 Exhaust Canister
Part # 005-2620406V / 005-2620407V / 005-2620408V
Qty. Description Part Number
1 M-2 Mufer Canister 005-187-208M
1 Slip-On Tube 005-26204S
1 Rubber Lined Mufer Clamp 005-2C2
1 HARDWARE KIT 005-262-3
1 X-Ring Kit 005-7-2-3KIT
1 Barrel Clamp 005-27-57MSH
1 Black AL Spacer 005-S-8
1 TBR Sticker Kit 015-10212
Commentaires sur ces manuels